|
|
Item Posts
Sort Order
|
|
|
rising power windows that dont work?
|
jester13
New User
| Posts: 1
| Joined: 10/08
Posted: 10/28/08
06:30 PM
|
|
Gents! I need your help, I recently purchased my first low rider after all the years of dreamin and with it of course came problems, the power windows dont work and the windows are rolled down. How can i rig the motor or by pass the system and roll the windows up??? In need of a helping hand, Jester13
|
|
|
|
|
Posted: 07/14/09
04:41 AM
|
|
You can take the door panel off and disconnect the motor or reverse the wires in the motor to see if that will raise them. If not you will need to get new motors for your windows. It's not a hard thing to replace. You will have to remove the glass to get to the motor but that should only be a couple of bolts. Raise the glass or take it completely out then replace the motor. Connect everything back up and it should work fine.
|
|
|
|
GEOGEO
New User
| Posts: 2
| Joined: 07/09
Posted: 07/16/09
02:55 PM
|
|
I HAVE 1992 PONT. F.B. EASY IT DISCONNECT THE WINDOW MOTOR,,,ALL SO R/SIDE/WINDOW WORKS SLOW WHEN IT IS MOVING,ANY IDEAS WHY..........THANK YOU ........
|
|
|
|
|
|
GEOGEO
New User
| Posts: 2
| Joined: 07/09
Posted: 07/16/09
03:00 PM
|
|
ALSO ON THIS PONT.F.B. IT HAS REAL BAD FADE PAINT,NEED TO WHAT IS A GOOD RUBBING COMP,IT WAS PAINTED ABOUT,3YRS,AGO NOW SOME BODY PAINT IS BAD AND SOME IS NOT.YR IS 1992,WITH T/TOPS.............HELP ......HELP
|
|
|
|
snowmann
New User
| Posts: 6
| Joined: 10/09
Posted: 10/28/09
06:28 PM
|
|
remove door pan. remove window motor and lift window in to place.install screws where they cant be seen to hold windows up
|
|
|
|
|
|
|