Lowrider Cars, Girls, Pictures and Car Shows at LowRiderMagazine.com
Share This Share This Num Posts    Sort Order
1994 lincoln already has air but..  
lincoln..94 lincoln..94
New User | Posts: 3 | Joined: 04/07
Posted: 04/14/07
11:42 AM

whats up my 94 towncar already has air but is there a way i can like bag it or does it already have bags? i know nothing about any of this lol..in my trunk theres a switch to turn the air suspension on and off and thats it...can i like get a remote to put it at my desired height? well let me know something i can do please im lost---rodrigo  


 
tbrown tbrown
Moderator | Posts: 579 | Joined: 08/06
Posted: 04/24/07
10:51 AM

You should try emailing our tech editor at saul.vargas@primedia.com  


 
putt putt
New User | Posts: 2 | Joined: 01/08
Posted: 01/29/08
08:45 PM

i have a 92 lincoln towncar. the switch in the trunk is 4 the air suspeion. i don't think u can put a switch on it to raise or drop it. but be sure to turn the switch off before u jack your car up cause you can blow your bags  


 
putt putt
New User | Posts: 2 | Joined: 01/08
Posted: 01/29/08
08:45 PM

i have a 92 lincoln towncar. the switch in the trunk is 4 the air suspeion. i don't think u can put a switch on it to raise or drop it. but be sure to turn the switch off before u jack your car up cause you can blow your bags  


 
lowdown101 lowdown101
New User | Posts: 4 | Joined: 04/08
Posted: 04/09/08
03:02 PM

the guy above is right a remote will not work because the bags are regulated by the ecu but if you get an air bag setup minus buying the bags you will be able to  


 
KontrolPhreak KontrolPhreak
New User | Posts: 3 | Joined: 06/08
Posted: 06/10/08
04:27 PM

You can remove the factory air bags in the back and replace them with a new set of aftermarket air bags an brackets. This is what we specialize in, the aftermarket kits and components. Or you can search for a fitting to adapt the factory single bellow sleeve bag your vehicle currently has to work with external equiptment.

There is a way to release the air from the factory bags and drive the vehicle lower in the rear, but the ride will be poor. If you want to keep the same smooth ride, just lower, then you need to modify the height switch that's located on the axle. By moving the sensors lower axle mount down, it will trick the ECU to think the car is higher, and it will lower the pressure to compensate once you turn the ignition on after a few seconds.

Kontrol Phreak @
KP Components
www.kplinks.com  


Kontrol Phreak @
KP Components
www.kplinks.com

 
SEARCH:
Advanced
  • RSS Feed
    • Add to My Yahoo!
    • Add to Google
    • Subscribe on Bloglines
    • Subscribe on NewsGator
    • MyMSN
    • My AOL
    • Add to NetVibes
    • Add to Rojo
    • Add to NEWSBURST
    • Add to Technorati
    SUBSCRIBE TO OUR FORUMS