Hi everyone im new to the site but have been reading and collecting the magizine for years, great stuff never get enough, but i have a question to ask! i own a 1994 chrysler LHS and im about a day or two away from buying a set or four 100 spoke daytons, now thats the good news, but the problem i am having is this, i don't know if i should be buying 13in or 14 in in regards to smaller wheels, now the car comes stock with 16's but then agian so dose a 1994 cadillac fleetwood and i have seen plenty of those in lowrider magazine that have 13x7's on them, so basically what im asking is dose anyone know which size i should be buying here cause i don't want to get the wrong ones!!!! please if someone could help that would be awsome, and my second question is this, on the cadillac fleetwoods that have 13x7 deep dishes on them the rims don't stick out past the fender, but i've seen a chrysler LHS like mine with daytons on it and they stick way out way past the fender, now is ther anything i can do to prevent this or maybe something that has to be modifyed and suggestions would be great and thanks agian  

If you don't wont them to stick out you have to get a Standerd or FWD Rim. You can get A Deep Dish But they will stick out and it is bad for your FWD they put added stress on your drive axles Which makes your hub bearings go bad faster. The size rim you should use depends on how big your brake rotor and caliper is make sure you check that before you buy anything.

Hope This Helps
High-Class Customs  

THANK YOU VERY MUCH! for the help so what your saying is if i buy a set of 14x7 standered offset daytons that that would be alright for my car? now i know that they will still stick out a bit but i have that worked out, but i think a set of 14x7 will work even if i have to modify a little cause the set of daytons i saw on the other LHS were 15x7's and i want 14's the most so thanks agian and any other help or suggestions would be great thanks agian!!  

No prob. We have put a 14x7 Std. on your car before. you should have no prob. with it. Any other ? you have feel free to drop us a line

High-Class Customs
(262)877-9292
High-Class@netscape.com  

That is the best news i have gotten!!!! thanks so much for your help i really appreciate it!!!! and i do have another question, am i going to have to modify anything and if so what?? and do you think they will stick out past the fender very far or just a bit? and my last question is what type of low profile tire would you suggest with 14's?? and thanks agian for all your wisdom!!!!  

They will stick out a bit but not bad. And as for mods I don't think You have to any but don't "" me, You may have to Mod a bit But nothing Bad. As for tires it's all up to you. Just go to a tire shop and ask for the lowest profile but you can run any tire you wont.

E-Mail a pic. we would like to see it when it's done
High-Class Customs
High-Class@netscape.com  

thanks brotha i really appreciate all your help and experiance, and soon i'll be asking for help with hydros or airbags so i hope you don't mind ( lol ) well best wishes to ya and thanks agian!!             Ceno!